Find Out More About Our Easter Holiday Delivery & Opening Times Here

35KGB Epoxy Coated Steel Grease Trap

Why Buy the 35KGB Epoxy Coated Grease Separator?

The 35KGB Epoxy Coated Steel Grease Trap is designed to separate kitchen fats, oils and grease from waste water, preventing troublesome blockages in drainage systems and improving the quality of waste water discharge. The large 155 litre total capacity to inlet/outlet equates to a 35 kg grease capacity and the ability to deal with kitchen waste from up to 220 meals per day. Manufactured using durable epoxy coated steel, this unit is suitable for indoor, outdoor and underground use. With air tight seals and fully welded seams, this grease interceptor contains any unwanted odours and provides essential strength and durability required to perform in tough commercial kitchens. 

Key Features of the 35KGB Grease Trap

  • High quality, durable manufacture
  • Seams are fully welded for added strength
  • Utilises 'multifit' connections as standard
  • Prevent escape of unwanted odours with an air tight seal
  • Features improved waste water discharge
  • Includes T-pipe free flow control
  • Manual type grease trap

Requirements and Specifications

  • 155 litre capacity to inlet/outlet
  • Dispose of waste from 220 meals per day
  • Inlet/outlet measures 85mm
  • 371mm height to outlet
  • 133 litre per minute flow rate
  • Number of connected sinks: 4
  • Fully compliant with BS EN 1825-1:2004
  • Designed in accordance with BS EN-1825-2:2002

Manufacturer's Warranty

The 35KGB is supplied with a full 5 year parts and labour warranty included as standard.

Please Note: Orders placed before 2pm are eligible for next working day delivery.

An additional charge is applicable for delivery to Scotland, Northern Ireland and Off-Shore addresses.

SKU 35KGB
Delivery Next Day Delivery
Capacity Specification 35 kg
Warranty 5 year Parts and Labour
Exterior Finish Epoxy Coated Steel
Height (mm) 500
Width (mm) 810
Depth (mm) 530

➕Parts Only Warranty

 

A 'Parts only' warranty covers the cost of replacement for any mechanical components which fail (due to manufacturer fault) within the warranty period, causing breakdown or compromised performance.

➕Parts and Labour Warranty (Full Warranty)

A 'Parts & Labour' or 'full' warranty means that should any mechanical components fail (due to manufacturer fault) causing break down or performance issues with your equipment, within the term of the warranty, the cost of replacement parts will be covered by the manufacturer. Any engineer charges incurred through a site visit, diagnosis and replacement of malfunctioning parts will also be covered.

➕Back to Base Warranty

In the event of a fault occurring equipment will need to be returned to the manufacturer for repair. This is typically arranged by the manufacturer however the customer will be responsible for ensuring equipment is appropriately packaged and protected. Equipment, once repaired, is sent back to the customer at the manufacturer’s expense.

➕Semi-Commercial Warranty

Typically applicable to smaller catering equipment, a semi-commercial warranty is designed for light duty use only in semi-commercial settings. If fault occurs due to overuse or misuse in high production areas, repair costs will not be covered by the warranty.

➕Edge Chip Warranty

Applicable to crockery items, edge chip warranties cover edge chipping occurring under normal food service conditions including storage, service, washing and refrigeration. Damage due to misuse or the dropping of items will not be covered.

35KGB Epoxy Coated Steel Grease Trap

SKU: 35KGB

x Discontinued

Height (mm): 500
Width (mm): 810
Depth (mm): 530
More Specifications
  • 35 kg grease capacity
  • 133 litre per minute flow rate
  • Suitable for use indoors, outdoors, and underground
  • Reduce blockages of drainage systems caused by fats, oils and grease
  • Dimensions: 500 x 810 x 530 (HxWxD)mm
iwoca pdp banner iwoca pdp banner

iwocaPay - Buy Now, Pay Later

What is iwocaPay?

iwocaPay is an affordable payment solution that allows Limited companies to get the equipment they need without large upfront costs. A choice of manageable repayment options are available. With Pay in 3 - Interest Free and Pay in 12 payment plans, businesses can make those essential big purchases without blowing the budget - spreading payments over 3 or 12 months. iwocaPay is available on equipment purchases over £240 including VAT.

Why Choose iwocaPay

Features & Benefits  Pay in 3 Pay in 12
Available on transactions £240 - £30,000 inc. VAT ✔  ✔ 
Apply in minutes ✔  ✔ 
Interest fees Interest Free 3.33% per month
No upfront costs ✔  ✔ 
First payment due 30 days from date of approval ✔  ✔ 
Repay early with no extra charges ✔  ✔ 

How do I pay with iwocaPay?

It's simple...

  • Add your equipment to your basket
  • Choose to pay with iwocaPay at the checkout
  • Select your payment terms:
    • Pay in 3 Interest Free
    • Pay in 12
    • Prefer to Pay Now? Choose the Bank Transfer option for instant, fast & secure payment
  • When your application is approved, we dispatch your order for delivery as soon as possible.

For more information, please see our Introducing iwocaPay - Buy Now Pay Later page. 

Lease available from £2.13 Ex VAT per week *

Minimum order value £1000 Excl. Tax

*Based on an established business over 60 months

Read More >>

Quick Guide to Leasing & Leasing Calculator

At FFD we offer a range of financial solutions including a Lease Purchase option that allows you to buy the right, quality equipment for your business without tying up your cashflow. Payable in small & manageable monthly instalments over periods between 2 and 5 years. Lease purchase has helped 1000s of our customers drive their business forward.

 

Leasing is available on all purchases over £1000 + VAT. Read on for quick facts about leasing or alternatively, for more in-depth information about leasing criteria and who can apply, read our Truth About... Commercial Leasing article in FFD Info Centre.

 

Use our simple leasing calculator below to quickly check lease figures and calculate your estimated repayments. 

 

Advantages of leasing from FFD Commercial Refrigeration

 

  • ✅ Tax Benefits - You can offset 100% of leased equipment costs against tax liability of your business to maximise tax efficiency.

 

Top Tip for Saving: For maximum savings choosing a 2 year lease deal results in repaying less than the initial capital outlay when factoring in tax savings. Choosing longer repayment plans will cost more than the total equipment cost over the term of the lease.

  

  • ✅ Instant, Maximum Benefit - When leasing you can invest in the best equipment for the job, even if business budgets do not allow for outright purchase.

 

  • ✅ Flexible Repayment Structure - Allow easy budgeting by tailoring repayments to your business cashflow.

 

  • ✅ High Acceptance Rate - We have access to one the biggest lending portfolios in the country including self funded deals, significantly increasing the chances of acceptance for our customers to the best deals.

 

  • ✅ Fast Approval – Our lenders can provide credit decisions quickly.

 

  • ✅ Remove the Worry - Spread the cost  of your equipment over the working life of the appliance/s.

 

Advisory Notes;

*The tax calculations detailed in the Lease Calculator are for illustration purposes only and DO NOT apply to the education and schools sector. Please contact your tax advisors for accurate information relating to your business activities.

*Term and figures quoted assume a clear credit profile and therefore could be subject to change.

*Prices do not include VAT except where specified.

*Warranty for equipment purchases is as per product description regardless of lease terms. We recommend taking a full parts and labour warranty for the entirety of the lease deal where possible. Please give us a call to enquire about extended leases.

 

For further details please see our grease management solutions leasing page.

Equipment Type : Catering & Refrigeration

Monthly Payment: £Ex VAT

Weekly Payment: £Ex VAT

Tax Savings: £Ex VAT

Net Cost: £Ex VAT

Please select valid terms and enter equipment cost.

Why Buy the 35KGB Epoxy Coated Grease Separator?

The 35KGB Epoxy Coated Steel Grease Trap is designed to separate kitchen fats, oils and grease from waste water, preventing troublesome blockages in drainage systems and improving the quality of waste water discharge. The large 155 litre total capacity to inlet/outlet equates to a 35 kg grease capacity and the ability to deal with kitchen waste from up to 220 meals per day. Manufactured using durable epoxy coated steel, this unit is suitable for indoor, outdoor and underground use. With air tight seals and fully welded seams, this grease interceptor contains any unwanted odours and provides essential strength and durability required to perform in tough commercial kitchens. 

Key Features of the 35KGB Grease Trap

  • High quality, durable manufacture
  • Seams are fully welded for added strength
  • Utilises 'multifit' connections as standard
  • Prevent escape of unwanted odours with an air tight seal
  • Features improved waste water discharge
  • Includes T-pipe free flow control
  • Manual type grease trap

Requirements and Specifications

  • 155 litre capacity to inlet/outlet
  • Dispose of waste from 220 meals per day
  • Inlet/outlet measures 85mm
  • 371mm height to outlet
  • 133 litre per minute flow rate
  • Number of connected sinks: 4
  • Fully compliant with BS EN 1825-1:2004
  • Designed in accordance with BS EN-1825-2:2002

Manufacturer's Warranty

The 35KGB is supplied with a full 5 year parts and labour warranty included as standard.

Please Note: Orders placed before 2pm are eligible for next working day delivery.

An additional charge is applicable for delivery to Scotland, Northern Ireland and Off-Shore addresses.

SKU 35KGB
Delivery Next Day Delivery
Capacity Specification 35 kg
Warranty 5 year Parts and Labour
Exterior Finish Epoxy Coated Steel
Height (mm) 500
Width (mm) 810
Depth (mm) 530

➕Parts Only Warranty

 

A 'Parts only' warranty covers the cost of replacement for any mechanical components which fail (due to manufacturer fault) within the warranty period, causing breakdown or compromised performance.

➕Parts and Labour Warranty (Full Warranty)

A 'Parts & Labour' or 'full' warranty means that should any mechanical components fail (due to manufacturer fault) causing break down or performance issues with your equipment, within the term of the warranty, the cost of replacement parts will be covered by the manufacturer. Any engineer charges incurred through a site visit, diagnosis and replacement of malfunctioning parts will also be covered.

➕Back to Base Warranty

In the event of a fault occurring equipment will need to be returned to the manufacturer for repair. This is typically arranged by the manufacturer however the customer will be responsible for ensuring equipment is appropriately packaged and protected. Equipment, once repaired, is sent back to the customer at the manufacturer’s expense.

➕Semi-Commercial Warranty

Typically applicable to smaller catering equipment, a semi-commercial warranty is designed for light duty use only in semi-commercial settings. If fault occurs due to overuse or misuse in high production areas, repair costs will not be covered by the warranty.

➕Edge Chip Warranty

Applicable to crockery items, edge chip warranties cover edge chipping occurring under normal food service conditions including storage, service, washing and refrigeration. Damage due to misuse or the dropping of items will not be covered.