Goslyn GOS80 Automatic Grease Trap

Why Buy the Goslyn GOS80 Automatic Grease Trap?

Elevate your kitchen's grease management with the Goslyn GOS80 Automatic Grease Trap, engineered for high-capacity needs. Typically connected to multi-sink wash-up stations, standard 3-bowl sinks (as found in fast-food giants like KFC), double-stacked combi ovens, 20-grid combi ovens, or wok burners, this grease trap is the epitome of efficiency.

The GOS80 grease removal unit (GRU) boasts neoprene seals on the top and base, ensuring a secure, leak-free fit. It doesn't just meet industry codes and standards; it surpasses them, guaranteeing compliance with regulations and eco-friendly practices.

The built-in 220V/50Hz immersion heater (CE listed) maintains effluent warmth during idle periods, preventing grease congealing and blockages. The strainer basket effectively blocks solid debris, reducing the risk of backups and maintenance.

Accessing and maintaining the unit is effortless with easy-access hinged lid compartments. The self-closing drain valve ensures efficient grease containment.

With two included oil collection cassettes and no moving parts, the Goslyn GOS80 offers dependable, low-maintenance grease management, allowing your kitchen to operate smoothly and sustainably.

*Please note these units are only supplied to approved vetted contractors from the manufacturer.

Key Features of the Goslyn GOS80 Automatic Grease Trap:

  • Usually connected to multi-sink wash up, standard 3 bowl sink (KFC etc), double stacked combi ovens, 20 grid combi ovens or wok burners.
  • Neoprene seals on top/base of unit
  • The Goslyn™ meets (and exceeds) the industry codes and standards
  • 220V/50hz Immersion heater (CE listed) to keep effluent warm during idle periods
  • Strainer basket to prevent solid debris from entering the drain pipes
  • Easy access hinged lid compartments
  • Self-closing drain valve included
  • Two oil collection cassettes included
  • No moving parts

Required Clearances:

  • Headroom needed above strainer basket: 305mm
  • 2.0” inlet
  • 2.0” outlet
  • Access to front oil cassette
  • Access to hinged lid for oil valve
  • 100mm clearance each side for pipes

Installation:

Installation is recommended by the manufacturer themselves. A free site survey is provided by the manufacturer which will then have the price based for installation from the results. If using a third party engineer, these will need to be surveyed by the manufacturer before being allowed to proceed with installation. Failure to do so will result in a void in warranty. Please contact us for further information.

Aftercare Availability:

A chargeable aftercare is also available directly from the manufacturer. This option offers an initial consultation with a manufacturer approved engineer through a whatsapp or facetime video. This call could resolve your issue and get your unit up and running within a short call, rather than costing for a payout for a third party engineer. This is due to the unit not having any moving components and usually results in an easy fix.

This option runs every 3 months from purchase (90 days). Please contact us for further information.

SKU GOS80
Weight 34.000000
Delivery Standard 3 to 5 Working Days
Warranty 10 Years on Stainless Steel Parts, 1 Year on Other Parts/Materials
Exterior Finish Stainless Steel
Height (mm) 724
Width (mm) 890
Depth (mm) 534
Brand Goslyn

➕Parts Only Warranty

 

A 'Parts only' warranty covers the cost of replacement for any mechanical components which fail (due to manufacturer fault) within the warranty period, causing breakdown or compromised performance.

➕Parts and Labour Warranty (Full Warranty)

A 'Parts & Labour' or 'full' warranty means that should any mechanical components fail (due to manufacturer fault) causing break down or performance issues with your equipment, within the term of the warranty, the cost of replacement parts will be covered by the manufacturer. Any engineer charges incurred through a site visit, diagnosis and replacement of malfunctioning parts will also be covered.

➕Back to Base Warranty

In the event of a fault occurring equipment will need to be returned to the manufacturer for repair. This is typically arranged by the manufacturer however the customer will be responsible for ensuring equipment is appropriately packaged and protected. Equipment, once repaired, is sent back to the customer at the manufacturer’s expense.

➕Semi-Commercial Warranty

Typically applicable to smaller catering equipment, a semi-commercial warranty is designed for light duty use only in semi-commercial settings. If fault occurs due to overuse or misuse in high production areas, repair costs will not be covered by the warranty.

➕Edge Chip Warranty

Applicable to crockery items, edge chip warranties cover edge chipping occurring under normal food service conditions including storage, service, washing and refrigeration. Damage due to misuse or the dropping of items will not be covered.

Downloads

Goslyn GOS80 Automatic Grease Trap

In stock

Delivery: Standard 3 to 5 Working Days
Height (mm): 724
Width (mm): 890
Depth (mm): 534
More Specifications
loader
Loading...
iwoca pdp banner iwoca pdp banner

iwocaPay - Buy Now, Pay Later

What is iwocaPay?

iwocaPay is an affordable payment solution that allows businesses to get the equipment they need without large upfront costs. A choice of manageable repayment options are available. With Pay in 3 - Interest Free and Pay in 12 payment plans, businesses can make those essential big purchases without blowing the budget - spreading payments over 3 or 12 months. iwocaPay is available on equipment purchases over £240 including VAT.

Why Choose iwocaPay

Features & Benefits  Pay in 3 Pay in 12
Available on transactions £240 - £30,000 inc. VAT ✔  ✔ 
Apply in minutes ✔  ✔ 
Interest fees Interest Free 3.33% per month
No upfront costs ✔  ✔ 
First payment due 30 days from date of approval ✔  ✔ 
Repay early with no extra charges ✔  ✔ 

How do I pay with iwocaPay?

It's simple...

  • Add your equipment to your basket
  • Choose to pay with iwocaPay at the checkout
  • Select your payment terms:
    • Pay in 3 Interest Free
    • Pay in 12
    • Prefer to Pay Now? Choose the Bank Transfer option for instant, fast & secure payment
  • When your application is approved, we dispatch your order for delivery as soon as possible.

For more information, please see our Introducing iwocaPay - Buy Now Pay Later page. 

Lease available from £11.47 Ex VAT per week *

Minimum order value £1000 Excl. Tax

*Based on an established business over 60 months

Read More >>

Quick Guide to Leasing & Leasing Calculator

At FFD we offer a range of financial solutions including a Lease Purchase option that allows you to buy the right, quality equipment for your business without tying up your cashflow. Payable in small & manageable monthly instalments over periods between 2 and 5 years. Lease purchase has helped 1000s of our customers drive their business forward.

 

Leasing is available on all purchases over £1000 + VAT. Read on for quick facts about leasing or alternatively, for more in-depth information about leasing criteria and who can apply, read our Truth About... Commercial Leasing article in FFD Info Centre.

 

Use our simple leasing calculator below to quickly check lease figures and calculate your estimated repayments. 

 

Advantages of leasing from FFD Commercial Refrigeration

 

  • ✅ Tax Benefits - You can offset 100% of leased equipment costs against tax liability of your business to maximise tax efficiency.

 

Top Tip for Saving: For maximum savings choosing a 2 year lease deal results in repaying less than the initial capital outlay when factoring in tax savings. Choosing longer repayment plans will cost more than the total equipment cost over the term of the lease.

  

  • ✅ Instant, Maximum Benefit - When leasing you can invest in the best equipment for the job, even if business budgets do not allow for outright purchase.

 

  • ✅ Flexible Repayment Structure - Allow easy budgeting by tailoring repayments to your business cashflow.

 

  • ✅ High Acceptance Rate - We have access to one the biggest lending portfolios in the country including self funded deals, significantly increasing the chances of acceptance for our customers to the best deals.

 

  • ✅ Fast Approval – Our lenders can provide credit decisions quickly.

 

  • ✅ Remove the Worry - Spread the cost  of your equipment over the working life of the appliance/s.

 

Advisory Notes;

*The tax calculations detailed in the Lease Calculator are for illustration purposes only and DO NOT apply to the education and schools sector. Please contact your tax advisors for accurate information relating to your business activities.

*Term and figures quoted assume a clear credit profile and therefore could be subject to change.

*Prices do not include VAT except where specified.

*Warranty for equipment purchases is as per product description regardless of lease terms. We recommend taking a full parts and labour warranty for the entirety of the lease deal where possible. Please give us a call to enquire about extended leases.

 

For further details please see our grease management solutions leasing page.

Equipment Type : Catering & Refrigeration

Monthly Payment: £Ex VAT

Weekly Payment: £Ex VAT

Tax Savings: £Ex VAT

Net Cost: £Ex VAT

Please select valid terms and enter equipment cost.

  • paypal
  • visa
  • mastercard
  • Iwoca Pay
  • american-express
  • stripe
  • applepay
  • googlepay
  • link
  • bacs

Why Buy the Goslyn GOS80 Automatic Grease Trap?

Elevate your kitchen's grease management with the Goslyn GOS80 Automatic Grease Trap, engineered for high-capacity needs. Typically connected to multi-sink wash-up stations, standard 3-bowl sinks (as found in fast-food giants like KFC), double-stacked combi ovens, 20-grid combi ovens, or wok burners, this grease trap is the epitome of efficiency.

The GOS80 grease removal unit (GRU) boasts neoprene seals on the top and base, ensuring a secure, leak-free fit. It doesn't just meet industry codes and standards; it surpasses them, guaranteeing compliance with regulations and eco-friendly practices.

The built-in 220V/50Hz immersion heater (CE listed) maintains effluent warmth during idle periods, preventing grease congealing and blockages. The strainer basket effectively blocks solid debris, reducing the risk of backups and maintenance.

Accessing and maintaining the unit is effortless with easy-access hinged lid compartments. The self-closing drain valve ensures efficient grease containment.

With two included oil collection cassettes and no moving parts, the Goslyn GOS80 offers dependable, low-maintenance grease management, allowing your kitchen to operate smoothly and sustainably.

*Please note these units are only supplied to approved vetted contractors from the manufacturer.

Key Features of the Goslyn GOS80 Automatic Grease Trap:

  • Usually connected to multi-sink wash up, standard 3 bowl sink (KFC etc), double stacked combi ovens, 20 grid combi ovens or wok burners.
  • Neoprene seals on top/base of unit
  • The Goslyn™ meets (and exceeds) the industry codes and standards
  • 220V/50hz Immersion heater (CE listed) to keep effluent warm during idle periods
  • Strainer basket to prevent solid debris from entering the drain pipes
  • Easy access hinged lid compartments
  • Self-closing drain valve included
  • Two oil collection cassettes included
  • No moving parts

Required Clearances:

  • Headroom needed above strainer basket: 305mm
  • 2.0” inlet
  • 2.0” outlet
  • Access to front oil cassette
  • Access to hinged lid for oil valve
  • 100mm clearance each side for pipes

Installation:

Installation is recommended by the manufacturer themselves. A free site survey is provided by the manufacturer which will then have the price based for installation from the results. If using a third party engineer, these will need to be surveyed by the manufacturer before being allowed to proceed with installation. Failure to do so will result in a void in warranty. Please contact us for further information.

Aftercare Availability:

A chargeable aftercare is also available directly from the manufacturer. This option offers an initial consultation with a manufacturer approved engineer through a whatsapp or facetime video. This call could resolve your issue and get your unit up and running within a short call, rather than costing for a payout for a third party engineer. This is due to the unit not having any moving components and usually results in an easy fix.

This option runs every 3 months from purchase (90 days). Please contact us for further information.

SKU GOS80
Weight 34.000000
Delivery Standard 3 to 5 Working Days
Warranty 10 Years on Stainless Steel Parts, 1 Year on Other Parts/Materials
Exterior Finish Stainless Steel
Height (mm) 724
Width (mm) 890
Depth (mm) 534
Brand Goslyn

➕Parts Only Warranty

 

A 'Parts only' warranty covers the cost of replacement for any mechanical components which fail (due to manufacturer fault) within the warranty period, causing breakdown or compromised performance.

➕Parts and Labour Warranty (Full Warranty)

A 'Parts & Labour' or 'full' warranty means that should any mechanical components fail (due to manufacturer fault) causing break down or performance issues with your equipment, within the term of the warranty, the cost of replacement parts will be covered by the manufacturer. Any engineer charges incurred through a site visit, diagnosis and replacement of malfunctioning parts will also be covered.

➕Back to Base Warranty

In the event of a fault occurring equipment will need to be returned to the manufacturer for repair. This is typically arranged by the manufacturer however the customer will be responsible for ensuring equipment is appropriately packaged and protected. Equipment, once repaired, is sent back to the customer at the manufacturer’s expense.

➕Semi-Commercial Warranty

Typically applicable to smaller catering equipment, a semi-commercial warranty is designed for light duty use only in semi-commercial settings. If fault occurs due to overuse or misuse in high production areas, repair costs will not be covered by the warranty.

➕Edge Chip Warranty

Applicable to crockery items, edge chip warranties cover edge chipping occurring under normal food service conditions including storage, service, washing and refrigeration. Damage due to misuse or the dropping of items will not be covered.

Downloads