18KG GT18 Stainless Steel commercial Grease Trap

Why Buy the 18KG GT18 Stainless Steel commercial Grease Trap?

The GT18 medium sized commercial Grease Trap is the ideal solution to helping prevent unwanted fats, oils and grease (FOG's) build up in your drains. Made from catering grade 304 stainless steel, the GT18 is suitable for 1-3 sink bowls for establishments producing 100-150 meals per day.

This manual 75 Litre inlet capacity grease trap runs entirely using the flow of water and internal directional baffles which ensures waste water easily escapes whilst allowing fats, oils and grease to cool, rising to the surface and staying within the trap. This GT18 has a 18kg Grease Capacity. 

Unlike other grease traps, the GT18 makes regular draining super easy by including a red syphon valve towards the top of the trap to easily run off fats, oils and grease within seconds! 

This fortnightly recommendation ensures your trap flows freely and in addition, has incorporated two lower side drain valves at either end that can be used to totally drain the trap for scheduled deep cleans.

This grease trap complies with BS EN 1825-1:2004 and designed in accordance with BS EN 1825-2:2002 and is supported by a five year manufacturer defect warranty. 

Key Features Of The GT18 Grease Trap:

  • Suitable for 1-3 standard sink bowls
  • Minimise Drain Cleaning Call-Out Charges
  • Improved Wastewater Discharge Quality
  • Air Tight Seal - Eliminate Unwanted Odours
  • Corrosion Free Construction
  • Uses Standard Multi-fit Connections
  • BS EN 1825-1:2004
  • BS EN 1825-2:2002

Specifications:

  • Dimensions: 650 x 450 x 325mm (w x l x h)
  • Inlet / Outlet Size: 50mm (2")
  • Grease Capacity: 18kg
  • Capacity to Inlet Outlet: 75 Litres
  • Meals Per Day: 100-150
  • Flow Rate: (LPM) 89

Warranty:

 Five year manufacturer defect warranty

SKU GT18
Weight 0.100000
Capacity Specification 18 kg
Warranty 5 Year
Exterior Finish Stainless Steel
Height (mm) 325
Width (mm) 650
Depth (mm) 450
Brand Cater Kitchen

➕Parts Only Warranty

 

A 'Parts only' warranty covers the cost of replacement for any mechanical components which fail (due to manufacturer fault) within the warranty period, causing breakdown or compromised performance.

➕Parts and Labour Warranty (Full Warranty)

A ‘Parts & Labour' or 'full' warranty means that should any mechanical components fail (due to manufacturer fault) causing break down or performance issues with your equipment, within the term of the warranty, the cost of replacement parts will be covered by the manufacturer. Any engineer charges incurred through a site visit, diagnosis and replacement of malfunctioning parts will also be covered.

➕Back to Base Warranty

In the event of a fault occurring equipment will need to be returned to the manufacturer for repair. This is typically arranged by the manufacturer however the customer will be responsible for ensuring equipment is appropriately packaged and protected. Equipment, once repaired, is sent back to the customer at the manufacturer’s expense.

➕Semi-Commercial Warranty

Typically applicable to smaller catering equipment, a semi-commercial warranty is designed for light duty use only in semi-commercial settings. If fault occurs due to overuse or misuse in high production areas, repair costs will not be covered by the warranty.

➕Edge Chip Warranty

Applicable to crockery items, edge chip warranties cover edge chipping occurring under normal food service conditions including storage, service, washing and refrigeration. Damage due to misuse or the dropping of items will not be covered.

18KG GT18 Stainless Steel commercial Grease Trap

SKU: GT18

In stock

Height (mm): 325
Width (mm): 650
Depth (mm): 450
More Specifications
  • 304 catering grade stainless steel
  • Suitable for 1-3 standard sink bowls
  • Minimise Drain Cleaning Call-Out Charges
  • Improved Wastewater Discharge Quality
iwoca pdp banner iwoca pdp banner

iwocaPay - Buy Now, Pay Later

What is iwocaPay?

iwocaPay is an affordable payment solution that allows Limited companies to get the equipment they need without large upfront costs. A choice of manageable repayment options are available. With Pay in 3 - Interest Free and Pay in 12 payment plans, businesses can make those essential big purchases without blowing the budget - spreading payments over 3 or 12 months. iwocaPay is available on equipment purchases over £240 including VAT.

Why Choose iwocaPay

Features & Benefits  Pay in 3 Pay in 12
Available on transactions £240 - £15,000 inc. VAT ✔  ✔ 
Apply in minutes ✔  ✔ 
Interest fees Interest Free 3.33% per month
No upfront costs ✔  ✔ 
First payment due 30 days from date of approval ✔  ✔ 
Repay early with no extra charges ✔  ✔ 

How do I pay with iwocaPay?

It's simple...

  • Add your equipment to your basket
  • Choose to pay with iwocaPay at the checkout
  • Select your payment terms:
    • Pay in 3 Interest Free
    • Pay in 12
    • Prefer to Pay Now? Choose the Bank Transfer option for instant, fast & secure payment
  • When your application is approved, we dipatch your order for delivery as soon as possible.

For more information, please see our Introducing iwocaPay - Buy Now Pay Later page. 

Lease available from £1.33 Ex VAT per week *

Minimum order value £1000 Excl. Tax

*Based on an established business over 60 months

Read More >>

Quick Guide to Leasing & Leasing Calculator

At FFD we offer a range of financial solutions including a Lease Purchase option thats allows you to buy the right, quality equipment for your business without tying up your cashflow. Payable in small & manageable monthly installments over periods between 2 to 5 years. Lease purchase has helped 1000's of our customers drive their business forward.

 

Leasing is available on all purchases over £1000 + VAT. Read on for quick facts about leasing or alternatively, for more indepth information about leasing criteria and who can apply, read our Truth About... Commercial Leasing article in FFD Info Centre.

 

Use our simple leasing calculator below to quickly check lease figures and calculate your estimated repayments. 

 

Advantages of leasing from FFD Commercial Refrigeration

 

  • ✅ Tax Benefits - You can offset 100% of leased equipment costs against tax liability of your business to maximise tax efficiency.

 

Top Tip for Saving: For maximum savings choosing a 2 year lease deal results in repaying less than the initial capital outlay when factoring in tax savings. Choosing longer repayment plans will cost more than the total equipment cost over the term of the lease.

  

  • ✅ Instant, Maximum Benefit - When leasing you can invest in the best equipment for the job, even if business budgets do not allow for outright purchase.

 

  • ✅ Flexible Repayment Structure - Allow easy budgeting by tailoring repayments to your business cashflow.

 

  • ✅ High Acceptance Rate - We have access to one the biggest lending portfolios in the country including self funded deals, significantly increasing the chances of acceptance for our customers to the best deals.

 

  • ✅ Fast Approval – Our lenders can provide credit decisions quickly.

 

  • ✅ Remove the Worry - Spread the cost  of your equipment over the working life of the appliance/s.

 

Advisory Notes;

*The tax calculations detailed in the Lease Calculator are for illustration purposes only and DO NOT apply to the education and schools sector. Please contact your tax advisors for accurate information relating to your business activities.

*Term and figures quoted assume a clear credit profile and therefore could be subject to change.

*Prices do not include VAT except where specified.

*Warranty for equipment purchases is as per product description regardless of lease terms. We recommend taking a full parts and labour warranty for the entirety of the lease deal where possible. Please give us a call to enquire about extended leases.

 

For further details please see our grease management solutions leasing page.

Equipment Type : Catering & Refrigeration

Monthly Payment: £Ex VAT

Weekly Payment: £Ex VAT

Tax Savings: £Ex VAT

Net Cost: £Ex VAT

Please select valid terms and enter equipment cost.

PayPal Logo

Multiple payment options with

>

loader
Loading...

Why Buy the 18KG GT18 Stainless Steel commercial Grease Trap?

The GT18 medium sized commercial Grease Trap is the ideal solution to helping prevent unwanted fats, oils and grease (FOG's) build up in your drains. Made from catering grade 304 stainless steel, the GT18 is suitable for 1-3 sink bowls for establishments producing 100-150 meals per day.

This manual 75 Litre inlet capacity grease trap runs entirely using the flow of water and internal directional baffles which ensures waste water easily escapes whilst allowing fats, oils and grease to cool, rising to the surface and staying within the trap. This GT18 has a 18kg Grease Capacity. 

Unlike other grease traps, the GT18 makes regular draining super easy by including a red syphon valve towards the top of the trap to easily run off fats, oils and grease within seconds! 

This fortnightly recommendation ensures your trap flows freely and in addition, has incorporated two lower side drain valves at either end that can be used to totally drain the trap for scheduled deep cleans.

This grease trap complies with BS EN 1825-1:2004 and designed in accordance with BS EN 1825-2:2002 and is supported by a five year manufacturer defect warranty. 

Key Features Of The GT18 Grease Trap:

  • Suitable for 1-3 standard sink bowls
  • Minimise Drain Cleaning Call-Out Charges
  • Improved Wastewater Discharge Quality
  • Air Tight Seal - Eliminate Unwanted Odours
  • Corrosion Free Construction
  • Uses Standard Multi-fit Connections
  • BS EN 1825-1:2004
  • BS EN 1825-2:2002

Specifications:

  • Dimensions: 650 x 450 x 325mm (w x l x h)
  • Inlet / Outlet Size: 50mm (2")
  • Grease Capacity: 18kg
  • Capacity to Inlet Outlet: 75 Litres
  • Meals Per Day: 100-150
  • Flow Rate: (LPM) 89

Warranty:

 Five year manufacturer defect warranty

SKU GT18
Weight 0.100000
Capacity Specification 18 kg
Warranty 5 Year
Exterior Finish Stainless Steel
Height (mm) 325
Width (mm) 650
Depth (mm) 450
Brand Cater Kitchen

➕Parts Only Warranty

 

A 'Parts only' warranty covers the cost of replacement for any mechanical components which fail (due to manufacturer fault) within the warranty period, causing breakdown or compromised performance.

➕Parts and Labour Warranty (Full Warranty)

A ‘Parts & Labour' or 'full' warranty means that should any mechanical components fail (due to manufacturer fault) causing break down or performance issues with your equipment, within the term of the warranty, the cost of replacement parts will be covered by the manufacturer. Any engineer charges incurred through a site visit, diagnosis and replacement of malfunctioning parts will also be covered.

➕Back to Base Warranty

In the event of a fault occurring equipment will need to be returned to the manufacturer for repair. This is typically arranged by the manufacturer however the customer will be responsible for ensuring equipment is appropriately packaged and protected. Equipment, once repaired, is sent back to the customer at the manufacturer’s expense.

➕Semi-Commercial Warranty

Typically applicable to smaller catering equipment, a semi-commercial warranty is designed for light duty use only in semi-commercial settings. If fault occurs due to overuse or misuse in high production areas, repair costs will not be covered by the warranty.

➕Edge Chip Warranty

Applicable to crockery items, edge chip warranties cover edge chipping occurring under normal food service conditions including storage, service, washing and refrigeration. Damage due to misuse or the dropping of items will not be covered.

Important Information