5KG GT5 Stainless Steel light commercial Grease Trap

SKU
GT5

Products may differ, images are for illustration purposes only.

Price
Regular Price £150.00 Special Price £149.00 Ex VAT
£178.80 Inc VAT

Lease from £0.65 pw

Minimum order value £1000 ex VAT

IMPORTANT INFORMATION

important_large_delivery

General Delivery Information.

Please be aware of any delivery restrictions, low bridges, narrow roads, parking restrictions or anything else that can stop delivery. Please click on the the Delivery and Returns tab for more important information.

This product requires a waste connection.

This product requires a waste connection. Please make sure these fittings are available and situated within 1m of the appliance.

Why Buy the 5KG GT5 Stainless Steel light commercial Grease Trap?

The GT5 light commercial Grease Trap is our entry-size solution to helping prevent unwanted fats, oils and grease (FOG's) build up in your drains.  Made from catering grade 304 stainless steel, the GT5 is suitable for a single sink bowl and can also be used for domestic waste..

This manual 16 Litre inlet capacity grease trap runs entirely using the flow of water and internal directional baffles which ensures waste water easily escapes whilst allowing fats, oils and grease to cool, rising to the surface and staying within the trap. This GT5 has a 5kg Grease Capacity. 

Unlike other grease traps, the GT5 makes regular draining super easy by including a red syphon valve towards the top of the trap to easily run off fats, oils and grease within seconds! 

This fortnightly recommendation ensures your trap flows freely and in addition, has incorporated two lower side drain valves at either end that can be used to totally drain the trap for scheduled deep cleans.

This grease trap complies with BS EN 1825-1:2004 and designed in accordance with BS EN 1825-2:2002 and is supported by a five year manufacturer defect warranty. 

Key Features Of The GT5 Grease Trap:

  • 304 catering grade stainless steel
  • Suitable for 1 standard sink bowl
  • Minimise Drain Cleaning Call-Out Charges
  • Improved Wastewater Discharge Quality
  • Air Tight Seal - Eliminate Unwanted Odours
  • Corrosion Free Construction
  • Uses Standard Multi-fit Connections
  • BS EN 1825-1:2004
  • BS EN 1825-2:2002

Specifications:

  • Dimensions: 380 x 275 x 230mm (w x l x h)
  • Inlet / Outlet Size: 50mm (2")
  • Grease Capacity: 5kg
  • Capacity to Inlet Outlet: 16 Litres
  • Meals Per Day:: 25-50
  • Flow Rate: (LPM) 27

Warranty:

 Five year manufacturer defect warranty

Units:
Dims
Weight
Capacity
More Information
SKU GT5
Capacity Specification 5kg
Warranty (spec) 5 Years
Exterior Finish Stainless Steel
Height (mm) 230
Width (mm) 275
Depth (mm) 380
Brand Cater Kitchen
Warranty Filter 5 Years
 

There are no options available for this product.

There are no documents for this product. If you require more information please contact the sales team.

For full details please read our Delivery, Returns & Cancellations page

KEY DELIVERY INFORMATION
The majority of deliveries are free to mainland UK

Please use the Delivery Cost Calculator to check if you are
eligible. A surcharge may be applicable to some postcodes in the UK.

Standard deliveries are made on an 18 tonne vehicle.

Please make sure a vehicle of this size (think a double decker bus
or bin lorry) can get to the delivery location. Delivery on a
smaller vehicle can be arranged with prior notice however will
incur an additional cost.

Deliveries are typically made between 8am & 6pm however a small number of manufacturers may deliver between 7am & 7pm.

We are unable to give an estimate of delivery time as all
deliveries are at the courier’s discretion. Timed delivery options
are available on selected products/manufacturers however this
will incur a surcharge.

RETURNS AND CANCELLATIONS

Any return made on the grounds of mis-order by the customer or incorrect measurements etc. will incur charges.
Any cancellation made once an order has been: processed, dispatched for delivery or left the manufacturer’s site, will be subject to a restocking fee, even if you have not yet received delivery.
Delivery Cost Calculator
Order within 
for EST delivery of

The majority of manufacturers will offer a recycling and disposal service. Where manufacturer services aren't available we recommend contacting your local authority or a reputable company listed in your area.

Ordered a new piece of equipment and arranged for recycling and disposal through the same manufacturer? It is important to bear in mind that not all recycling services will be carried out on the same day as delivery. Equipment remains your responsibility, that includes with regards to environmental aspects, so make sure you have suitable storage for old units until they can can be collected.

All units scheduled on a recycle service must be ready to collect outside of the premises on the day of collection.

Read more about our recycling services here.

At FFD Grease Management Solutions we offer a range of financial solutions including a Lease Purchase option thats allows you to buy the right, quality grease management solutions for your business without tying up your cashflow. Payable in small & manageable monthly installments over periods between 1 to 5 years. Lease purchase has helped 1000's of our customers drive their business forward.

Leasing is available on all purchases over £1000 + VAT. To learn more about leasing criteria and who can apply read our The Truth About...Commercial Leasing article in FFD Info Centre.

Use our simple leasing calculator to quickly calculate your estimated repayments. 

Advantages of leasing from FFD Grease Management Solutions

  • Tax Benefits - You can offset 100% of leased grease management solutions rental costs against tax liability of your business to maximise tax efficiency.

  • Instant, Maximum Benefit - When leasing you will get the best equipment for the job straight away, rather than waiting to accrue budget to allow purchase.

  • Flexible Repayment Structure - Allow easy budgeting by tailoring repayments to your business cashflow.

  • High Acceptance Rate - We have access to one the biggest lending portfolios in the country including self funded deals, significantly increasing the chances of acceptance for our customers to the best deals.

  • Fast Approval – We can often give you an answer within a hours.

  • Remove the Worry - Spread the cost  of your grease management solutions over the working life of the appliance/s.

Please Note;

The lease figures displayed are an estimate and subject to status. Terms and Conditions will vary depending on the lender sourced. All documentation will be provided prior to approval.

For further details please see our Leasing grease management solutions page.

Equipment Type : Catering & Refrigeration
Monthly Payment:
GMS Product Questions